Chapter 7 Burst
The HDG3000B(C) can output a waveform for a specified number of cycles, called a burst. It
supports control of burst output by internal, external or manual trigger source; supports three
kinds of burst types including N cycle, Infinite cycle and Gated. Burst is allowed with sine, square,
ramp, pulse, Harmonic, noise (allowed only in gated burst mode) or arbitrary waveforms (except
DC).
Select Burst
Burst Type
Burst Count
Burst Period
Burst Phase
Trigger Source
Gate Polarity
Trigger Output Edge
User Manual 60
To Next Page
Loading...
