Then enter the interface that you need to save, andpress[Utility] button, the instrument completes
the screenshot and enters the Utility menu. At this time, the signal generator has cached the
screenshot inside the instrument.PressSavePicsoftkey, and the instrument will save the
screenshot to the USB stick.
Note: The screenshot cached is always the screen at the last time the [Utility]button was
pressed.
10.4FirmwareUpdate
Copy the firmware to a USB stick (FAT32 format, storage space is less than or equal to 32GB)
and insert the USB stick into the USB port on the front panel of the instrument.
Press[Utility] >Updatesoftkey, enter the file browser interface, use the knob to select the
firmware file, pressRecallsoftkey to specify the file, and then pressOKsoftkey to start the firmware
update.
User Manual 74
To Next Page
Loading...
