Hantek HDG3000BC Series - Appendix A Specifications

Appendix A Specifications
All technical specifications are suitable for HDG3000B(C) series signal generators.Unless
otherwise stated, all technical specifications are guaranteed upon the following two conditions.
 The signal generator is in the calibration period.
 The signal generator has operated continuously for more than 30 minutes at the specified
operating temperature (18℃ to 28℃).
All specifications used are guaranteed, except those marked "Typical".
Model
HDG3102B
HDG3082B
HDG3062B
HDG3042B
HDG3022B
HDG3012B
Channel
2
Memory Depth 2M
Maximum
Frequency
100MHz 80MHz 60MHz 40MHz 25MHz 15MHz
Sampling Rate
300MSa/s
Voltage
Resolution
16Bit
Waveforms
Standard
Waveforms
Sine, Square, Ramp, Pulse, Noise, Harmonic, DC
Arbitrary
Waveforms
More than 160 kinds, including Sinc, Exponential Rise, Exponential Fall,
ECG, Gauss, Haver Sine, Lorentz, Dual-Tone, etc.
Frequency Characteristics
Sine
1uHz~100MHz
1uHz~80MHz
1uHz~60MHz
1uHz~40MHz
1uHz~25MHz
1uHz~15MHz
Square
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
Pulse
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
Ramp
1uHz~2MHz
1uHz~2MHz
1uHz~2MHz
1uHz~2MHz
1uHz~2MHz
1uHz~2MHz
Harmonic
1uHz~50MHz 1uHz~40MHz 1uHz~30MHz 1uHz~20MHz
1uHz~10MHz
1uHz~5MHz
Noise (-3dB) 100 MHZ bandwidth
Arbitrary
1uHz~20MHz 1uHz~20MHz 1uHz~20MHz 1uHz~15MHz
1uHz~15MHz
1uHz~15MHz
Resolution
1uHz
Accuracy
±1ppm, 18 ~ 28 ℃
Square Characteristics
Rise/Fall time
Typical (1kHz, 1Vpp)
≤9ns
Overshoot
Typical (100kHz, 1Vpp)
≤5%
Duty Cycle
0.001%~99.999%;
Range varies with frequency
Non-symmetry 1% of the period + 4ns
User Manual 82