Hantek HDM3000 User Manual

58
The Scale soft key specifies the horizontal scale:

Default sets the scale equal to the measurement range.

Manual allows you to configure demarcations, either as High and Low values,
or as Span values around the Center value.
For example, a scale of -500 Ω Low
value and 1000 Ω High value can be specified to 250 Ω Center value with 1500 Ω
Span.
Select an auxiliary measurement
Press 2nd Meas to select and display auxiliary measurements. For example, for the
DCV measurement function, you can select the ACV, peak, or pre-mathematical
function as the auxiliary measurement function. If ACV is selected as the auxiliary
measurement, the DCV measurement results will be displayed as a number at the top
of the display, the DCV will be displayed in the bar meter, and the ACV measurement
results will be displayed above the bar meter:

Hantek HDM3000 Specifications

General

Brand	Hantek
Model	HDM3000
Category	Multimeter
Language	English