Need help?Do you have a question about the Hantek HDM3000 and is the answer not in the manual?
General| True RMS | Yes |
|---|---|
| Continuity Test | Yes |
| Diode Test | Yes |
| Data Logging | Yes |
| Interface | USB |
| DC Current Range | 600μA to 10A |
| AC Current Range | 600μA to 10A |
| Resistance Range | 600Ω to 60MΩ |
| Display | LCD |
Safety precautions to avoid injury and product damage.
Defines terms and symbols used in the manual for safety.
Instructions for maintaining and cleaning the instrument.
Product compliance with EU WEEE directive and recycling guidance.
Steps for inspecting the instrument upon receipt.
Instructions on how to adjust the instrument's handle.
Description of the instrument's front panel layout and controls.
Details of the instrument's rear panel connections and features.
Lists different models and their specifications/options.
Step-by-step guide for initial setup and operation of the multimeter.
How to connect test leads for various measurement types.
Overview of supported measurement types like DC/AC voltage, current, resistance.
Configuring trigger modes and managing measurement readings.
Using the Probe Hold function to capture and review readings without constant display monitoring.
Introduction to mathematical operations like Null, dB/dBm, Statistics, and Limits.
Overview of display modes: digital, bar meter, trend chart, and histogram.
Introduction to the Utility menu functions for configuration and management.
Guidance on avoiding errors in DC measurements, including thermoelectric and load errors.
How to perform accurate resistance measurements, covering 2-wire and 4-wire methods.
Understanding and using the True RMS AC measurement capabilities and accuracy.
How to measure capacitance and related precautions for accuracy.
Overview of the instrument's calibration process, including self-test and gain calibration.
Contains annex information for the HDM3000 multimeter, such as standard accessories.
Summary of the product's warranty terms and conditions.
To Next Page
