Why does my Hanwei BX176 show a time error?
If your Hanwei Gas Detector displays a time error, it could be due to the battery voltage being exhausted. Try charging the detector promptly and then set the time again. Alternatively, electro magnetic interference might be the cause, in which case, simply set the time again.
How to fix a Hanwei BX176 that cannot power on?
If your Hanwei Gas Detector is not powering on, it could be due to low voltage. Make sure to charge the detector in time. If the system has halted or there's a circuit fault, contact the seller for assistance.
Why are my Hanwei BX176 Gas Detectors showing inaccurate detect?
If your Hanwei Gas Detector is showing inaccurate readings, it might be because the sensor is overdue for replacement. Replace the sensor. Alternatively, it may be because the sensor hasn't been calibrated in a long time, in which case you should recalibrate the sensor.
What to do if my Hanwei BX176 has no response to gas?
If your Hanwei Gas Detector isn't responding to gas, it might be because the response time is incomplete; wait for the sensor to respond. If that doesn't work, there could be a circuit fault, and you should contact the seller.
What does it mean when my Hanwei BX176 Gas Detectors' detecting mode show“-0”?
If the detecting mode of your Hanwei Gas Detector shows “-0”, it indicates sensor drift. Perform a zero translation to resolve this issue.
Why is the zero translation function unavailable on my Hanwei Gas Detectors?
If the zero translation function is unavailable on your Hanwei Gas Detector, it's likely due to excessive sensor drift. Calibrate the sensor, or if the problem persists, replace the sensor.
Lists the primary attributes and capabilities, such as display, alarms, and sensor types.
Describes the physical components and their arrangement on the device.
Illustrates and explains the meaning of icons and information shown on the detector's screen.
Details the specific actions performed by each button on the device.
Instructions for starting the detector and completing its initial self-test sequence.
Steps to properly shut down the gas detector.
Procedure for performing a daily functional check to ensure the detector is working correctly.
Overview of accessing and navigating the device's settings and configuration options.
Explains the different types of alarms and their corresponding display indicators.
How to view current readings, time, STEL, TWA, and other operational parameters.
Procedure for setting the detector's baseline reading in a clean air environment.
Comprehensive guide on recalibrating the detector and modifying alarm thresholds.
General| Detection Range | 0-100%LEL |
|---|---|
| Measurement Range | 0-100%LEL |
| Resolution | 1%LEL |
| Battery | Rechargeable lithium battery |
| Protection Level | IP65 |
| Protection Rating | Explosion-proof |
| Gas Type | Combustible gases |
| Detection Gases | Methane, Propane, Butane |
| Alarm | Adjustable |
| Battery Life | ≥8 hours continuous operation |
| Operating Temperature | 50°C |
| Alarm Type | Audible, Visual |
To Next Page