BX176 portable single gas detector operation manual
9
After screen display this figure,press
and you can go into data communication
mode.①
After screen display this figure,press
and then you can change the password of
the detector（initial password is 0000）
Note: ① Only available when your purchased detector conclude this functon.
After enter the selected item, change the item content by
pressing or , press to confirm, press to exit without
save, below are the content meanning.
Turn off the function of this item
Turn on the function of this item
4.5 Alarm information
Below sheet shows each alarm’s display information
Low alarm:
Slow sandhi alarm sound
Alarm light flash
vibration ①
To Next Page
Loading...