overview
6_ overview
NAMES AND FUNCTIONS OF THE IP AUDIO MODULE (SPA-D1000)
Side
STAT
RESET
PoE+
ALARM
GND
IN OUT
a b
c d
STAT
RESET
PoE+
ALARM
GND
IN OUT
LINE
OUT
+ +
— —
G
SPEAKER
f
gh
e
Name Function Description
a
STATUS
When the initialization is in progress, the STATUS lamp blinks fast. When the initialization is
completed, it blinks slowly in an interval of 1 second.
b
ALARM
ALARM IN: An alarm input terminal.
ALARM OUT: An alarm output terminal. GND: It is a ground terminal.
c
RESET
A button that returns the product settings to the factory default values. Press the button for
approximately 12 seconds to initialize and reboot the product.
J
Do not disconnect the power until product resetting is complete. Doing so may cause malfunctions.
It will take up to 10 minutes to reboot the product after initializing it.
d
Network Terminal
A terminal that connects a switching hub supporting PoE or PoE+ and a network cable for power
and network connection.
e
micro SD card slot A slot for a micro SD card.
f
SPEAKER A terminal connected to a speaker.
g
LINE OUT An output terminal for external devices, such as an amplifier.
h
Grounding port
Used for earth-grounding.
Grounding serves to protect the product from lightning strikes.
Before connection, be sure to turn off the power of the device.
M
`
The IP audio module can be used as an IP speaker when connected to an analog speaker with a permissible input of 10W
or higher and an impedance of 8 ohms.
NAMES AND FUNCTIONS OF THE IP SPEAKERS (CEILING-MOUNT TYPE)
(SPA-C100B/SPA-C100W)
PoE+
STAT
RESET
ALA RM
GND IN
OUT
b
a
c
d
e
Name Function Description
a
Detachable grille Prevents dust intrusion.
b
Speaker unit Generates speaker vibration.
c
Audio module Equipped with an audio module.
d
Safety cable hook Secures the speaker during installation to prevent it from falling.
e
Bracket Secures the speaker to the ceiling board.
To Next Page
Loading...