HANYOUNG NUX GE Series - Panel Cutout; Specification; Connection Diagram

Specification
Connection Diagram
GE6
GE4-P1
GE4-P2
GE6-P1
GE6-P2
GE3-P1
NPN Input
Panel Cutout
GE3
GE4
45
66.5
92
68
Same as
above
More than
82
45
32
Same as
above
More than
60
More than
90
More than
130
More than
60
More than
57
Same as
above
Same as
above
+0.6
0
+0.5
0
+0.5
0
+0.7
0
+0.5
0
+0.5
0
GE6
GE3 GE7
a1
a2
L1
L2
Model
FND height
Counting speed and input
Memory for power
failure.
Input
ONE SHOT output
Timer operation
Dielectric Strength
Insulation Resistance
Withstanding noise
Protection structure
Ambient temperature
Ambient humidity
Weight
Certificate
100 - 240 V a.c (50 - 60 ) 10
24 - 60 V d.c / a.c (50 - 60 ) 10
Max. 9 VA
Max. 9 VA
Max. 13.5 V a.c Max. 13.5 V a.c
11
13
10
8
Min input
signal
External
output
power
Counter
Timer
Power
consumption
Power
voltage
a.c
d.c
a.c
d.c
a.c
d.c
Vibration
Shock
Relay
Life
Malfunction
Durability
Maifunction
Durability
Electrical
Mechanical
contact
Non-contact
Control output
12 V d.c ( 5 %) 200 Max.
12 V d.c (
5 %) 100 Max.
0.01-99.99 s [OUT1, OUT2(OUT)]
1a (OUT1), 1c (OUT2)
NO contact: 250V a.c. 3A resistance load, NC contact: 250V a.c. 2A resistance load
NPN 2 points(OUT,BAT.O)
Comparative cycle: repeated setup error less than 5 for every 2
Stable time: 100 stable time when POWER ON
2000 V a.c 50 - 60 for 1 minute
Min 100
(Based on 500 V d.c)
Square wave noise by noise simulator (1 pulse per 16ms) 2
(Power supply input terminal)
10 - 55 (for 1 min period) double amplitude 0.5 X.Y.Z each direction for 10 minutes
10 - 55 (for 1 min period) double amplitude 0.5 X.Y.Z each direction for 2 hours
100 (About 10G)
300
(About 30G)
Min. 100 thousand times (250 V a.c 2 A resistance load)
Min 1 million times
IP65 (Front part only)
-20 ~ 65
(Non freezing state)
-10 ~ 55
, 35 ~ 85 % R.H. (No freezing or decondensation)
1 cps / 30 cps / 1 K cps / 10 K cps Contact/Non-contact
10 years (Nonvolatile memory)
CP1, CP2, RESET, BATCH RESET (exclude TOTAL) 4inputs
[H] level 4 - 30 V d.c, [L] level 0 - 2 V d.c Internal pull up/pull
down resistance connection due to NPN/PNP setup
External reset Min. input signal range: select among 0.1ms / 1ms / 20 ms
START, INHIBIT, RESET Min. input signal range: select either 1ms / 20 ms
GE4
GE6
GE3
GE7
1 step
2 step
Capacity
1 step
2 step
Capacity
1c (OUT)
1a (OUT)
1c (OUT)
NPN 2 points(OUT1,OUT2)
Open collector 30 V d.c 100
Max.
Max.133 g
Max.138 g
CE
Max.203 g
Max.203 g
If you want to modify Input and output type, plesae contact HANYOUNG sales office