11
Before staring Installation Operation Specifications
2.5 Event output unit (ML-E) connections
●
ML-E has no communications address, and sends output by receiving signal with side
connector during module composition.
Mamimum 32 units
(Max. 31: if ML-E not included)
RS485
ML-E
●
ML-E can be located and connected anywhere during module composition.
ML-E
ML-E
●
When making up as one module, only 1 unit should be connected.
If several units of ML-E need to be used, it can be achieved by connecting power supply cable
and communication line with wiring method, instead of side connector.
ML-E
Power supply line
Communications cable
To Next Page
Loading...
