Need help?Do you have a question about the HANYOUNG NUX TD300 and is the answer not in the manual?
General| Brand | HANYOUNG NUX |
|---|---|
| Model | TD300 |
| Category | Temperature Controller |
| Language | English |
Verify the received product against the order and check for any external damage.
Important safety notices, quality guarantees, and conditions for product warranty.
Guidelines for selecting installation locations and essential precautions.
Step-by-step instructions for installing the temperature controller.
Explanation of model codes and their corresponding descriptions.
Technical drawings showing unit dimensions and terminal layouts.
Detailed methods for arranging power, sensor, output, and communication terminals.
Description of the initial screen displayed after power-on.
Explains how to use selection buttons and input boxes for settings.
Identifies and describes each component of the operation screen.
Guides on controlling temperature at a set value (SV).
Details on setting up and running operations based on time-programmed patterns.
How to display and configure temperature graphs.
Explains how to check operation status and various event indicators.
Overview of various operation screen displays.
How to access and navigate the setup menu screens.
Configuration options for operation modes, timing, and input settings.
Setting the system date, time, and timer for operations.
Detailed setup for patterns, segments, repeat/link, and standby modes.
Configuring sensor types, ranges, and input parameters.
Settings for control modes, output types, and transmission parameters.
Setting up internal signals for specific operation conditions.
Configuring alarm conditions, sources, and responsiveness.
Adjusting PID parameters for heating/cooling control.
Configuring digital inputs for RUN/STOP, STEP, and HOLD functions.
Setting up real relay or transistor outputs for various signals.
Configuring serial communication parameters (protocol, baud rate, etc.).
Language, control modes, password, and user information settings.
Technical specifications for various input signal types.
Technical specifications for control, relay, and transmission outputs.
Lists all available functions and their capabilities.
Details on communication standards, speed, and protocols.
Electrical ratings including voltage, power, and insulation.
Specifies conditions for installation and normal operation.
Guidelines for temperature, humidity, and shock during transport and storage.
To Next Page
