46
6.7 Point of Contact Output (D/O) Setup
Setup for point of contact output is the setup for real relay or the transistor output for various signals
in the system. Only the signals assigned here are outputted through the terminal. The point of contact
assignment can overlap (except for certain special cases), therefore, care must be taken for input.
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
