36
Setup system date and time. When the timer is set for operation, the [TIMER SET] light comes on (this
light goes off during operation). If stopped when the timer is activated at the set time, the operation
automatically starts. (This does not mean it does
self-power. Power must be on).
5.2 Time/ Timer Setup
Press [PROGRAM] button on the setup menu screen to enter program setup screen.
5.3 Program Setup
Press [PATTERN SETUP] button on the program setup screen to enter the detailed segment setup
screen (segments compose the pattern). The program control is performed in accordance to the
content and the order of segment settings made here.
{Independent operation for each channel
or 1 channel operation mode}
{Simultaneous operation of the channels}
5.3.1 Pattern Setup
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
