31
3.7 Errors and Indicators for Various Events
The program and fixed control operation screen 2 indicates the specific operation status.
The error caused by sensor disconnection or through input (D/I) on external connection point, can be
checked by pressing the [ERROR] button on the bottom of the operation screen 2 (in case of errors,
automatically goes to this screen). Operations start/end, power input and other events can be also
checked. (Up to 40 events are automatically stored).
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
