Harbor Breeze BRADBURY BRD60BNK6LRS User Manual (English)

Questions and Answers:

P
Paul SchultzAug 10, 2025
How to fix a Harbor Breeze BRADBURY BRD60BNK6LRS that does not move?
- D
  David BeardAug 10, 2025
  If your Harbor Breeze Fan isn't moving, start by checking the reverse switch and ensure it's fully engaged by pushing it firmly either left or right. Then, verify that the power is on and the fuse hasn't blown. If these aren't the issue, turn off the power, loosen the canopy, and inspect all wire connections for any faults. Also, check that the molex connections in the LED light kit are properly connected according to the instructions.
A
Anthony PhillipsAug 16, 2025
What to do if my Harbor Breeze Fan is working but the lights aren't?
- R
  richard85Aug 16, 2025
  If your Harbor Breeze Fan operates but the lights fail, first check the wires in the canopy and, if needed, rewire them according to the instructions. Ensure the wall switch to the fan is turned on. Also, check the wires from the LED light kit and, if necessary, rewire them according to the instructions.
Z
zreidAug 25, 2025
Why is my Harbor Breeze BRADBURY BRD60BNK6LRS wobbling so much?
- C
  Casey ThompsonAug 25, 2025
  If your Harbor Breeze Fan is wobbling excessively, several factors could be the cause. First, ensure that all motor screws and washers are tightened. If the issue persists, try switching one blade with a blade from the opposite side to address potential imbalances. Also, turn the power off and carefully loosen the canopy to check that the mounting bracket is securely attached. If your fan is too close to a vaulted ceiling, consider using a longer downrod or moving the fan. Finally, make sure that the set screws on the motor housing yoke and the hanging ball are properly tightened.
J
John KingSep 1, 2025
Why is my Harbor Breeze Fan making so much noise?
- E
  Emily WardSep 1, 2025
  If your Harbor Breeze Fan is operating noisily, begin by tightening all motor screws and washers, as loose blades can be a common cause. Inspect each blade for cracks and replace any that are damaged. If the fan is new, allow it a "break in" period of a few days, especially when running the fan at medium and high speeds, as this can sometimes reduce noise.

Harbor Breeze BRADBURY BRD60BNK6LRS Specifications

General

Brand	Harbor Breeze
Model	BRADBURY BRD60BNK6LRS
Type	Ceiling Fan
Blade Span	60 inches
Number of Blades	6
Reversible Motor	Yes
Light Kit Included	Yes
Light Bulb Type	LED
Number of Lights	1
Light Bulb Base Type	E26
Finish	Brushed Nickel
Mounting Options	Downrod
Indoor/Outdoor Use	Indoor
Remote Control Included	Yes
Mounting Type	Downrod
Room Size	Large
Style	Modern