To Next PageTo Next PageWhat to do if wires in light kit fitter are not wired correctly in Harbor Breeze CHESHIRE II?
If the wires in the light kit fitter of your Harbor Breeze Fan are not wired correctly, check them and re-wire according to the instructions on page 11. Also, ensure that the lamp light kit uses bulbs totaling no more than 190W.
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Motor Type | AC Motor |
| Number of Blades | 5 |
| Control Type | Remote Control |
| Finish | Brushed Nickel |
| Blade Pitch | 12 degrees |
| Reversible Motor | Yes |
| Material | Metal |
| Indoor/Outdoor Use | Indoor |
| Mounting Options | Downrod |
| Room Size | Large Room |
| Motor Speed | 3 Speeds |
Critical safety warnings related to installation and usage risks.
Important cautionary notes for safe operation and installation.
Installing the motor assembly, lock tab, and safety cable.
Finding and securing an attachment point for the safety cable.
Diagrams for different control setups (pull chains, wall switches).
Detailed steps for connecting fan wires using connectors.
Securely attach motor housing and blade arms.
Wire and attach the light kit fitter.
Attach glass shades and install bulbs.
Attach pull chain extensions for easier access.
Attach the extra switch housing to the switch plate.
Attach pull chain extension to the fan.
Use the center pull chain to turn lights ON or OFF.
Optimize fan performance for different seasons using the reverse switch.
