6
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Stepladder and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and Wire
Cutters
HARDWARE CONTENTS (shown actual size)
PREPARATION
DD
Pull Chain
Extension
Qty. 2
CC
Blade
Screw
Qty. 15
+ 1 extra
Wire
Connector
Qty. 4
BB
AA
Fiber Blade
Washer
Qty. 15
+ 1 extra
Turn off circuit breakers and wall switch to the fan
supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
INITIAL INSTALLATION
ON
OFF
ON
OFF
1
To Next Page
Loading...
Need help?
General
