13
Menus
Parameter selection is carried out from the menu key.
The menus can be scrolled to and fro with the arrow keys.
The upper line, in capital letters, displays the menu you are in.
The lower line, in small letters, displays the choices you have. When the
chosen menu is shown, press the menu key again to open the menu.
When modifying a parameter, prolonged pressure on the arrow key will
generally cause the data shown on the display to alter faster.
After the parameter is modified, press the accept key.
The display then changes back to the previous picture.
Press the accept key until the display returns to the main display.
There are 2 menu systems, the operator menu for general use and an
extended menu for initial set-up of the system. To access the extended
menu, press both arrow keys at the same time until the menu changes.
General keystroke
Press to enter menus.
Press to find desired menu.
Press to continue in the menu if needed.
Press to enter menu.
Press to find desired sub-menu or alter parameter.
Press to accept and exit the menu.
Press Repeat to exit the menus and go back to the normal display
function.
To Next Page
Loading...
Need help?
General
