58 HARDI
®
N-SERIES 3-PT SPRAYER DIAPHRAGM OPERATOR'S MANUAL
6.8 Lubrication
Recommended lubrication is shown in following tables.
Use ball bearing grease (lithium grease No. 2)
Note: If the sprayer is cleaned with a high pressure cleaner or fertilizer
has been used, we recommend lubrication of all sections.
N-series sprayer lubrication points
1. Pump
2. PTO
3. Agitation Control
4. MB Boom
5. Trapeze (40' MB only)
Position on
sprayer
Oil
Grease
Operation
hours
Page to find more
information
Winter protection
or off-season
storage
Fig. 30
1
4
2
3
5
Sprayer Boom
To Next Page
Loading...
