Hardi FOAM MARKER Standard

HARDI
HARDI
Part No. 67000603 9/03
HARDI
®
reserves the right to make changes in design,
material, or specifi cation without notice thereof.
HARDI
®
and other product names are trademarks of
HARDI
®
Inc. in the U.S. and in other countries.
FOAM MARKER
Standard Version
Operator's Manual

Hardi FOAM MARKER Standard Specifications

General

Brand	Hardi
Model	FOAM MARKER Standard
Category	Paint Sprayer
Language	English

Summary

1.0 Introduction to HARDI Foam Marker

2.0 Safety Precautions for Foam Marker Operation

3.0 Initial Setup of the HARDI Foam Marker

3.1 Control Box Installation

Step-by-step guide to installing the control box and routing wires for the foam marker.

3.2 Power Supply Connection

Details how to correctly connect the foam marker to a 12V power source, including polarity.

4.0 Operation of the HARDI Foam Marker

5.0 Mixing of Foam Concentrate

6.0 Mounting the Tank Bracket

6.1 HC 650 M, 950, 950 M, and Twin 650, 950 Mounting

Instructions for mounting the tank bracket for specific HC and Twin sprayer models.

6.2 Navigator 550, 800, 1000, 550 M, 800 M, 1000 M Mounting

6.3 Commander 750, 875, 1200 & Twin Force Mounting

6.4 Commander plus 750, 1200 & Twin Force Mounting

6.5 New Navigator 575, 1100 Tank Mounting

6.6 Delta 3-PT Tank Bracket Mounting

7.0 Mounting the Tank

7.1 All Tanks except New Navigator Mounting

How to mount the solution tank in the bracket for most HARDI models.

7.2 New Navigator Tank Mounting

8.0 Mounting the Compressor

8.1 HC 650 M, 950, 950 M, and Twin 650, 950 Compressor Mounting

Details mounting the compressor bracket for specific HC and Twin sprayer models.

8.2 Navigator 550, 800, 1000, 550 M, 800 M, 1000 M Compressor Mounting

8.3 Commander 750, 875, 1200 & Twin Force Compressor Mounting

8.4 Commander plus 750, 1200 & Twin Force Compressor Mounting

8.5 New Navigator 575, 1100 Compressor Mounting

8.6 Delta 3-PT Compressor Mounting

9.0 Installation of Hoses

10.0 Foam Generator Assembly

10.1 Eagle Booms Foam Generator Assembly

Instructions for assembling the foam dropper mount bracket for Eagle™ booms.

10.2 Falcon or MB Booms Foam Generator Assembly

10.3 Force or Twin Force Booms Foam Generator Assembly

11.0 Maintenance and Service

12.0 Trouble Shooting

13.0 Warranty Policy and Conditions

14.0 Notes