Hardi FOAM MARKER Standard User Manual

32
HARDI
®
FOAM MARKER STANDARD VERSION
13.0 WARRANTY POLICY AND CONDITIONS
HARDI
®
INC. , 1500 West 76th Street, Davenport, Iowa, USA; 5646 W. Barstow, Fresno, California, USA;
and 290 Sovereign Road, London, Ontario, Canada hereinafter called "HARDI
®
", offers the following
limited warranty in accordance with the provisions below to each original retail purchaser of HARDI
®
new
equipment of its own manufacturer, from an authorized HARDI
®
dealer, that such equipment is at the time
of delivery to such purchaser, free from defects in material and workmanship and that such equipment
will be warranted for a period of one year from the date of delivery to the end user providing the machine
is used and serviced in accordance with the recommendations in the Operator's Manual and is operated
under normal farm conditions.
1. This limited warranty is subject to the following exceptions:
a) Parts of the machine not manufactured by HARDI
®
, (i.e. engines, tires, tubes, electronic controls,
and other components or trade accessories, etc.) are not covered by this warranty but are sub-
ject to the warranty of the original manufacturer. Any claim falling into this category will be taken
up with the manufacturer concerned.
b) This warranty will be withdrawn if any equipment has been used for purposes other than for
which it was intended or if it has been misused, neglected, or damaged by accident, let out
on hire or furnished by a rental agency. Nor can claims be accepted if parts other than those
manufactured by HARDI
®
have been incorporated in any of our equipment. Further, HARDI
®
shall not be responsible for damage in transit or handling by any common carrier and under no
circumstances within or without the warranty period will HARDI
®
be liable for damages of loss of
use, or damages resulting from delay or any consequential damage.
2. We cannot be held responsible for loss of livestock, loss of crops, loss because of delays in
harvesting or any expense or loss incurred for labor, supplies, substitute machinery, rental for any
other reason, or for injuries either to the owner or to a third party, nor can we be called upon to be
responsible for labor charges, other than originally agreed, incurred in the removal or replacement of
components.
3. The customer will be responsible for and bear the costs of:
a) Normal maintenance such as greasing, maintenance of oil levels, minor
adjustments, etc.
b) Transportation of any HARDI
®
product to and from where the warranty
work is performed.
c) Dealer travel time to and from the machine or to deliver and return the machine
from the service workshop for repair.
d) Dealer traveling costs.
4. Parts defi ned as normal wearing items, (i.e. tires and V-belts) are not in any way covered under this
warranty.
5. This warranty will not apply to any product which is altered or modifi ed without the express written
permission of HARDI
®
and/or repaired by anyone other than an Authorized Service Dealer.
6. Warranty is dependent upon the strict observance by the purchaser of the following provisions:
a) That this warranty may not be assigned or transferred to anyone.
b) That the Warranty Registration Certifi cate has been correctly completed by dealer and pur-
chaser with their names and addresses, dated, signed and returned to the appropriate address
as given on the Warranty Registration Certifi cate.
c) That all safety instructions in the operators manual shall be followed and all safety guards regu-
larly inspected and replaced where necessary.

Hardi FOAM MARKER Standard Specifications

General

Brand	Hardi
Model	FOAM MARKER Standard
Category	Paint Sprayer
Language	English