Hardinge SUPER-PRECISION HC - Page 4

PREVENTIVE MAINTENANCE
DAILY
PAGE
Clean and Lubricate Lead Screw and Follower .. . ... ..... .. .... . ............ . . . ..... 14
Clean and Lubricate Guide Bar . . . . . . . . . . .. . .. .. . . .. . ...... .. . ..... ... ... . ... ... . . 14
WEEKLY
PAGE
Fill Oil Cup on Chasing Head .. . . . . . .. ..... . . ... ... ... ... ..... .. ........ .. .... .. . . 14
Cycle Threading Unit .. . ... . . .. . . . .. .................... . .. . . .. . ... ... . ...... .. . 14
Drain Filter Reservoir ......... . ...... . ...... .. . . ... ... . . . .. .. . ...... . ... .. ... ... 20
SEMI-ANNUALLY
PAGE
Clean Air Filter Element ......... . . . ... .. . . .. ... . .. .......... . . . . .. .. . . . . .. . ..... 20
DEPENDING ON USE
PAGE
Maintain Oil in Lubricator Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Note: Oil Base Cutting Fluids are Recommended for Maximum Life
of Automatic Thread i ng Unit.
Product
Die Makers Gr ease
Molylube #M-88
Ve locite No . 6
LUBRICANTS
(Use Recommended Product or Equivalent)
Vendor
Standard Die Set Co. (Div. of Dieco.)
Alpha-Molykote Corporation
Mobil Oil Corporation
2