Hardinge Talent 8/66 - User Manual

MAINTENANCE MANUAL
TALENT
®
6/45
TALENT 8/52
TALENT 8/66
TALENT 10/78
CNC LATHES
Equipped with a Fanuc 0i-T,
Fanuc 0i Mate-T,
or Siemens 810D Control
Revised: March 31, 2006
Manual No. M-448B Litho in U.S.A.
Part No. M B-0009500-0448 January, 2006
TP7086

Summary

Power-Up, Power-Down, and Lock-Out Procedures

Fanuc Control Operations

Procedures for powering up, homing, and powering down Fanuc-controlled lathes.

Siemens Control Operations

Procedures for powering up and powering down Siemens-controlled lathes.

Safety Lock-Out Procedures

Guidelines for safely locking out air and electrical power.

Lubrication System

Lubrication Alarms and Grease Application

Axis and Tailstock Lubrication

Detailed steps for lubricating X, Z axes and tailstock for different models.

Live Tool Gear and Line Replacement

Coolant System Management

Coolant Properties and Daily Maintenance

Details on coolant concentration, pH, water quality, and daily checks.

Coolant Level, Chip Removal, and Tank Cleaning

Coolant Pump Replacement

Step-by-step guide for replacing the coolant pump assembly.

Hydraulic System Operations

Hydraulic System Maintenance and Pressure Adjustment

Preventive Maintenance Schedule

Time-Based Maintenance Tasks

Detailed maintenance schedule based on operating hours (8, 40, 600, etc.).

Hardinge Talent 8/66 Specifications

General

Type	CNC Lathe
Max Turning Length	660 mm
Swing Over Bed	610 mm
Maximum Turning Length	660 mm
X-Axis Travel	175 mm
Z-Axis Travel	660 mm
Spindle Speed	4000 rpm