To Next PageTo Next Page
Need help?Do you have a question about the Hardinge T-51 and is the answer not in the manual?
Details required foundation, soil compaction, concrete specifications, and machine weight/dimensions.
Instructions for positioning, leveling, and anchoring the machine to the floor.
Procedures for identifying, removing, and installing shipping brackets for transport and installation.
Covers setup of air, electrical, coolant, hydraulic systems, chillers, power case, pendant, and grounding.
Instructions for checking and replacing control and axis drive batteries for long-term storage.
Procedures for lubricating machine axes and applying rust inhibitor for storage.
Detailed cleaning steps for spindles, air filter bowls, and coolant system components.
Steps to disconnect systems, secure machine for storage, and perform lockouts.
Contact and address details for the main Hardinge headquarters in the United States.
Addresses and contact information for Hardinge subsidiaries in Europe and Asia.
Information for authorized distributors, including contact details for France.
Details the capabilities of the lathes, including turret tool changes and optional features.
Specifies materials and fluids that can be used, and warnings against hazardous ones.
Critical warnings regarding chemical use, tooling, entrapment, and machine guards.
General
