To Next PageTo Next Page
Need help?Do you have a question about the Hardinge T-42 and is the answer not in the manual?
Provides critical safety warnings related to chemical use, bar feeds, spindle tooling, and entrapment.
Details requirements for machine foundation, weight, and footprint for proper installation.
Step-by-step guide for positioning and leveling the machine after removing it from the skid.
Instructions and diagrams for securely fastening the machine to the floor using hold-down brackets.
Instructions for connecting the air supply and setting machine air pressure.
Procedures for installing the spindle chiller unit, including hose and electrical connections.
Steps for installing the coolant tank, including handling chip conveyors.
Explains the importance of proper grounding and recommends a supplemental earth ground.
Details electrical requirements, wiring, and precautions for connecting power.
Step-by-step guide for making the electrical connection to the machine.
How to check and change the electrical phase sequence for proper machine operation.
Guidelines for lubricating machine axes for extended storage, including grease types and volumes.
Safety procedures for locking out electrical and air supplies before moving or storing the machine.
General
