Need help?Do you have a question about the Hardinge Talent 6/45 and is the answer not in the manual?
Essential safety guidelines for machine operation and maintenance.
Covers power-up, home, and power-down for Fanuc controlled machines.
Covers power-up and power-down for Siemens controlled machines.
Safety procedures for locking out air and electrical power.
Specifies grease volume and details axis lubrication for different models.
Covers tailstock, live tool gear lubrication.
Schedule of maintenance tasks based on operating hours.
General| Type | CNC Lathe |
|---|---|
| Max Turning Diameter | 450 mm |
| Control | Fanuc 0i-TF |
| Tool Capacity | 12 |
| Spindle Motor | 15 kW |
| Turret Capacity | 12 stations |
| Machine Weight | 9, 920 lbs (4, 500 kg) |
| Motor power | 15 kW |
| Max Turning Length | 450 mm |
| Spindle Speed | 5000 rpm |
| Bar Capacity | 65 mm |
| Max Swing | 580 mm |
| Rapid Traverse Rate (X/Z) | 30 m/min |
| Swing over bed | 580 mm |
| Distance between centers | 450 mm |
| Number of spindle speeds | Infinitely variable |
To Next Page
