Hargray DVR - Program Conflict Resolution; Record-It Overlays

myHARGRAY
DVR USER GUIDE
11
Program Conflict Resolution
When a program conflict arises that the system cannot automatically schedule around,
the user is presented with options to choose from.
Some examples of recording conflicts include:
• Starting Time – If one program starts before the other ends, the conflict resolu-
tion dialog box allows you to select which one to record.
• Priority – If two programs start at the same time, system will record the one with
the highest Priority attribute established in the system.
• Fewest Times – Choose to record the item with the fewest upcoming alternate
times (you must do this, the system will not).
• First in List – If all other aspects are equal, the system will pick the first item.
• Bandwidth Resolution – System exceeds max # streams – If the system does
not have the bandwidth to stream the PVR program in the background, then
10 seconds before the event, an overlay is displayed which gives the user the
chance to abort the recording.
Record-It Overlays
• Record-It Overlay – Change Channels: when the system will have to change
channels (exceeds max # streams) the user is prompted if they want to cancel
the event.
• Record-It Overlay – Action: when recording a program and the user initiates an
action that will cause the system to stop recording (ex. STOP, Channel +/-, etc.)
then the user is prompted to confirm stopping is ok.