Harley-Davidson Dyna 2008 - Page 175

ENGINE REMOVED FROM CHASSIS
Table 3-27. Engine Removed From Chassis
COMPONENT REPAIR
PROCEDURE
SERVICE PROCEDURE
Remove engine from motorcycle. See 3.13 REMOVING ENGINE FROM
CHASSIS.
Disassemble top end. See 3.15 TOP END OVERHAUL: DISASSEMBLY.
Inspect and repair.BREATHER ASSEMBLY
See 3.19 BREATHER ASSEMBLY*.
Inspect and repair.ROCKER ARM SUPPORT
See 3.20 ROCKER ARM SUPPORT PLATE*.
Inspect and repair.PUSH RODS, LIFTERS AND COVERS
See 3.21 PUSH RODS, LIFTERS AND
COVERS*.
Inspect and repair.CYLINDER HEAD
See 3.22 CYLINDER HEAD*.
Inspect and repair.CYLINDER
See 3.23 CYLINDER*.
Inspect and repair.PISTON
See 3.24 PISTON.
Assemble top end. See 3.16 TOP END OVERHAUL: ASSEMBLY.
Install engine in motorcycle. See 3.14 INSTALLING ENGINE IN CHASSIS.
Note: * If no other work is to be done, you may advance to 3.16 TOP END OVERHAUL: ASSEMBLY when this step is completed
during top end service.
3-18 2008 Dyna Service: Engine