Name: Harman Kardon AVR 10
Brand: Harman Kardon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

ENGLISH

CENTER

FRONT(left) FRONT(right)

REAR(right)

REAR(left)

WIDEBAND mode

Select this mode if you use a center speaker big

enough for reproducing all bass frequencies.

PHANTOM mode

Select this mode when you play back a Dolby

Surround program source without using a center

speaker. The sound of the center channel is

redirected to the front (L and R) speakers.

FRONT(left) FRONT(right)

REAR(right)

REAR(left)

CENTER

FRONT(left) FRONT(right)

REAR(right)

REAR(left)

NORMAL mode

Select this mode if you use a medium to small

center speaker. The bass sound of the center

channel is output from the front speakers, as a

small speaker cannot produce enough bass.

AVR10 engelsk 11/01/98 10:10 Side 11

Other manuals for Harman Kardon AVR 10

Questions and Answers:

Need help?

Do you have a question about the Harman Kardon AVR 10 and is the answer not in the manual?

Power

continuous average power stereo mode	35 Watts from 20Hz-20kHz @ <0.09% THD, both channels driven into 8 Ohms
continuous average power five channel surround mode front L&R channels	30 Watts from 20Hz-20kHz @ <0.3% THD, both channels driven into 8 Ohms
continuous average power five channel surround mode center channel	30 Watts at 1kHz @ <0.3% THD, driven into 8 Ohms

Amplifier Section