Harman Kardon AVR 300 User Manual

22 OPERATION
Operation
MODE
DOLBY DIGITAL
DTS
DOLBY PRO LOGIC
DOLBY 3 STEREO
HALL 1 AND HALL 2
THEATER
STEREO
FEATURES
Available only with digital input sources encoded with Dolby Digital data.It provides
up to five separate main audio channels and a special dedicated Low-Frequency Effects
channel.
Available only with digital input sources encoded with DTS data.Available on special
DVD, LD and audio-only discs, DTS provides up to five separate main audio channels and
a special dedicated low-frequency channel.
The standard mode for analog surround sound decoding. It uses information encoded
in a two-channel stereo recording to produce four distinct outputs: Left, Center, Right and
a Mono Surround channel. Use this mode for accurate reproduction of programs bearing
the Dolby Surround, DTS Stereo, UltraStereo or other “Surround” logos. Surround-encoded
programs include videocassette, DVD and LD movies,TV and cable programs, radio
programs and audio CDs. Dolby Pro Logic processing may also be used to provide a
pleasing surround effect with some stereophonic source material that does not carry
surround encoding.
Uses the information contained in a surround-encoded or two-channel stereo program to
create center-channel information. In addition,the information that is normally sent to the
rear-channel surround speakers is carefully mixed in with the front-left and front-right
channels for increased realism. Use this mode when you have a center-channel speaker
but no surround speakers.
These modes are designed for use with stereo recordings.They provide a sound-field
effect that simulates the complex combination of direct and reflected sounds that
create the rich reverberant atmosphere of a medium-sized concert hall (Hall 1) or a
large concert hall (Hall 2).
Surround processing uses matrix surround decoding to simulate a standard movie or
stage theater.
This mode turns off all surround processing and presents the pure left and right
channel presentation of two-channel stereo programs.
DELAY TIME RANGE
Center: 0 ms – 5 ms
Surround: 0 ms –15 ms
Delay not adjustable
15 ms – 30 ms
Initial Setting = 20 ms
No surround channels
Hall 1 – Fixed at 41 ms
Hall 2 – Fixed at 67 ms
(not adjustable)
27.3 ms (not adjustable)
No surround channels
Surround-Mode Chart

Harman Kardon AVR 300 Specifications

General

Brand	Harman Kardon
Model	AVR 300
Category	Receiver
Language	English