2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Front Panel Information Display
8 Rear Panel Connections
11 Main Remote Control Functions
14 Zone II Remote Control Functions
15 Installation and Connections
15 Audio Connections
15 Video Connections
16 SCART A/V Connections
18 System and Power Connections
19 Speaker Selection
19 Speaker Placement
20 System Configuration
20 First Turn On
20 Using the On-Screen Display
20 System Setup
21 Input Setup
21 Speaker Setup
23 Surround Setup
24 Adjustments for Other Inputs
25 Delay Settings
25 Night Mode Settings
25 Output Level Adjustment
26 Using EzSet
26 Manual Output Level Adjustment
28 Operation
28 Surround Mode Chart
30 Basic Operation
30 Source Selection
30 6/8-Channel Direct Input
31 Controls and Use of Headphones
31 Surround Mode Selection
32 Digital Audio Playback
32 Dolby Digital
32 DTS
32 PCM Audio Playback
32 MP3 Audio Playback
33 Selecting a Digital Source
33 Digital Bitstream Indicators
33 Speaker/Channel Indicators
34 Night Mode
34 Tape Recording
34 Output Level Adjustment
With Source Signals
35 Memory backup
36 Advanced Features
36 Surround Amplifier Channel Assignment
36 Display Brightness
36 Turn-On Volume Level
37 Semi-OSD Settings
37 Full-OSD Time Out Adjustment
37 Multiroom Operation
39 Tuner Operation
39 Basic Tuner Operation
39 Station Selection
39 Preset Tuning
40 RDS Operation
40 RDS Tuning
40 RDS Display Options
40 Program Search
41 Programming the Remote
41 Programming the Remote with Codes
41 Direct Code Entry
41 Auto Search Method
42 Code Readout
42 Learning Codes
42 Erasing Learned Codes
43 Macro Programming
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
1
– (number in a square) indicates a specific front-panel control
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
A
– (letter in a square) indicates an indicator in the front-panel display
å
– (letter in an oval) indicates a button on the Zone II remote
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN 61000-3-2/4.1995
Carsten Olesen
Harman Kardon Europe A/S
01/03
44 Programmed Device Functions
44 Volume Punch-Through
44 Channel Control Punch-Through
45 Transport Control Punch-Through
45 Reassigning Device Control Selectors
45 Resetting the Remote Memory
46 Function List
48 Troubleshooting Guide
48 Processor Reset
49 Technical Specifications
To Next Page
Loading...
