Need help?Do you have a question about the Harman Kardon AVR 505 LIMITED EDITION and is the answer not in the manual?
General| Total Harmonic Distortion | 0.07 % |
|---|---|
| THD | 0.07% |
| Weight | 14.1 kg |
| Type | AV Receiver |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kOhms |
| Signal to Noise Ratio | 90 dB |
| Audio Outputs | Digital optical: 1 |
| Surround Sound Formats | Dolby Digital, DTS |
| Tuning range | FM |
| Dimensions | 440 x 165 x 435 mm |
| Signal-to-Noise Ratio | 90 dB |
| Frequency Response | 10 Hz - 100 kHz |
Important safety warnings regarding electric shock and handling the appliance.
Guidelines for safe operation, handling, and maintenance of the unit.
Explains power switches, indicators, headphone jack, selector buttons, and tone controls.
Details tuning, input selection, surround mode selectors, indicators, and display controls.
Details analog and digital audio/video connections for sources and outputs.
Explains remote buttons for power on/off, input selection, and AVR control.
Explains the functions of remote buttons for AVR operation and programming.
Describes macro programming, punch-through features, and specific mode selection buttons.
Details buttons for surround modes, night mode, tuning, and general operation.
Guidance on connecting audio sources like CD players, tape decks, and recorders.
Instructions for connecting video sources like VCRs, DVD players, and satellite receivers.
Explains how to configure settings specific to each input source.
Steps for calibrating speaker output levels using test tones or program material.
Steps for selecting and assigning digital or analog inputs for each source.
Steps to perform a system reset for abnormal operation or memory issues.
To Next Page