To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVR 525 and is the answer not in the manual?
General| Brand | Harman Kardon |
|---|---|
| Model | AVR 525 |
| Category | Receiver |
| Language | English |
General safety guidelines and precautions for safe operation of the unit.
Guidelines for placing the unit for optimal operation and safety.
Instructions for cleaning the unit safely and effectively.
Procedures for safely moving the audio/video receiver.
FCC compliance and interference information.
Steps and recommendations for unpacking the new receiver.
Connecting various audio sources and components to the receiver.
Connecting video sources and displays to the receiver.
Connecting power sources and system components.
Setting up the IR link for multiroom remote control.
Options for connecting audio sources to a second zone.
Connecting A-BUS compatible devices for multiroom operation.
Connecting the receiver for external control via RS-232.
Connecting the unit to AC power outlets.
Guidance on choosing and positioning speakers for optimal sound.
Initial setup procedures including speaker and level calibration.
How to use the OSD system for configuration adjustments.
Configuring digital input, speaker settings, and surround modes for each source.
Selecting preferred surround sound modes for different inputs.
Configuring speaker types (large/small) and crossover points.
Adjusting speaker delay times for optimal audio timing.
Calibrating speaker output levels for balanced sound.
Automatic speaker calibration using the EzSet remote.
Manually adjusting speaker output levels.
Adjusting settings for additional input sources.
Fundamental steps for turning the unit on/off and selecting sources.
Procedures for powering the receiver on, off, and standby modes.
How to choose and switch between different audio/video inputs.
Connecting and selecting multi-channel direct audio sources.
Adjusting system volume and mute functions.
Choosing appropriate surround sound modes for various audio sources.
Connecting and playing digital audio sources.
How to connect and select digital audio inputs.
Indicators showing the type of digital signal being received.
Feature to adjust dynamic range for low-volume listening.
Key considerations for playing digital audio sources.
Playing audio from CDs and other PCM sources.
Playing MP3 audio files through the receiver.
Tuning AM/FM stations and storing presets.
Methods for selecting radio stations.
Storing and recalling favorite radio stations.
Accessing stored radio station presets.
Recording audio/video sources to external devices.
Configuring front-panel jacks for input/output use.
Fine-tuning output levels using program material.
Preserving system settings during power interruptions.
Assigning surround back channels for multiroom audio output.
Adjusting the brightness of the front panel display.
Setting a default volume level for when the unit powers on.
Configuring on-screen display messages for input changes.
Setting the duration for on-screen menu visibility.
Using RS-232 for remote control of multiroom functions.
Configuring the system for multiroom audio and IR link.
Controlling the multiroom system from a remote location.
Programming remote codes using direct three-digit entry.
Automatically finding remote codes for devices.
Retrieving programmed remote codes.
Teaching the remote new commands from other remotes.
Removing programmed codes from the remote.
Creating sequences of commands for one-button operation.
Understanding how remote buttons function for different devices.
Allowing volume control to affect AVR or other devices.
Controlling channel selection of one device while operating another.
Controlling transport functions of one device while operating another.
Changing input selector button assignments.
Restoring the remote to factory default settings.
Resetting the unit to clear system memory and resolve issues.
