Do you have a question about the Harman Kardon AVR 635 and is the answer not in the manual?
Channels | 7.1 |
---|---|
Type | AV Receiver |
Frequency Response | 10Hz - 50kHz |
Total Harmonic Distortion | 0.07% |
Input Sensitivity | 200mV |
Signal to Noise Ratio | 100dB |
Input Impedance | 47k ohms |
Audio D/A Converter | 24-bit/192kHz |
Weight | 24.5 lbs |
Digital inputs/outputs | 3 x Optical, 2 x Coaxial |
HDMI inputs/outputs | 1 output |
Video Inputs | 3 x Component, 3 x Composite |
Video Outputs | 1 component |
Audio Inputs | 3 optical, 2 coaxial |
Dimensions | 17.5 x 6.5 x 15.5 inches |
Expresses gratitude for purchasing the AVR 635 and highlights its features.
Details the AVR 635's capabilities as a home entertainment hub with advanced processing.
Covers critical safety guidelines for power, handling, and operation.
Provides recommendations for placing the unit to ensure proper ventilation and safety.
Details how to unpack, clean, and prepare the unit for use.
Describes the Standby/On switch and Main Power switch for unit operation.
Explains how to adjust volume and use tone controls for audio output.
Details how to select audio/video sources using front-panel buttons.
Covers buttons for selecting and cycling through surround sound modes.
Describes the Upper and Lower Display Lines for status information.
Details the front-panel door, headphone jack, and microphone input.
Explains connections for speakers, preamps, and digital/analog audio sources.
Details video input/output jacks for composite, S-video, and component signals.
Covers IR input/output, RS-232, and A-BUS connections for system control.
Covers Input Selectors, AVR Selector, Navigation, and Set buttons.
Details buttons for controlling volume, mute, and tone settings.
Explains buttons for tuning, dimming, channel selection, and digital input.
Covers buttons for playback, scanning, track skipping, and disc changes.
Details buttons for programming, OSD display, and memory functions.
Covers power, AVR selection, and input selectors for the Zone II remote.
Details volume control and playback buttons for the Zone II remote.
Provides initial steps for setting up the AVR 635 and connecting equipment.
Details how to connect various audio and video sources to the receiver.
Covers remote control extension, multiroom IR, A-BUS, and RS-232 connections.
Guides on selecting and positioning speakers for optimal sound.
Explains how to use the OSD menus for system adjustments.
Details setting up digital inputs, video assignments, and renaming inputs.
Guides on selecting and customizing surround sound modes.
Explains the process of automatic system calibration using the included microphone.
Covers manual configuration of speaker size, crossover, delay, and output levels.
Covers turning the unit on/off, standby mode, and sleep timer functions.
Details selecting sources, including direct inputs and digital audio playback.
Explains how to choose and activate various surround sound modes.
Guides on tuning AM/FM stations and storing/recalling presets.
Covers recording audio/video and configuring front-panel jacks as outputs.
Covers front-panel display fade and brightness adjustments.
Details setting default turn-on volume and OSD time-out options.
Explains how to enable or disable automatic polling of digital audio inputs.
Guides on configuring the multiroom system, input, and volume settings.
Details using surround back amplifiers for remote zone audio.
Covers preprogrammed and automatic code entry for devices.
Explains how to teach commands from an original remote to the AVR remote.
Details creating, recording, and erasing macro command sequences.
Guides on setting up volume, channel, and transport punch-through.
Explains how to rename devices and individual buttons on the remote.
Details the procedure for resetting the remote to factory defaults.
Covers setting remote priority timing and backlight options.
Provides a guide to common problems and their solutions.
Explains how to perform a system reset to resolve operational issues.