Need help?Do you have a question about the Harman Kardon AVR 630 and is the answer not in the manual?
General| Type | AV receiver |
|---|---|
| Channels | 7.1 |
| Total Harmonic Distortion | 0.07% |
| Frequency Response (±0.5dB) | 20 Hz - 20 kHz |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Weight | 22.5 lbs |
| Input Sensitivity/Impedance | 200 mV / 47 kΩ |
| Digital Audio Inputs | coaxial, optical |
| Audio Inputs | 5 |
| Dimensions (W x H x D) | 17.3 x 5.9 x 15.5 inches |
| Power Output | 75 watts per channel into 8Ω (stereo) |
Lists the AVR 630's key features and capabilities, including surround modes and connectivity.
Instructs users to check voltage compatibility to prevent hazards and unit damage.
Advises against using extension cords and how to handle damaged power cords.
Provides guidance on disconnecting the AC power cord safely.
Warns against opening the unit to avoid shock hazards and voiding the warranty.
Details proper placement for ventilation, stability, and avoiding hazards.
Provides instructions for cleaning the unit using appropriate methods.
Outlines steps to disconnect the unit before moving it.
Suggests saving packaging materials and provides disposal advice.
Details how to connect various audio sources and speakers to the AVR.
Explains how to connect video sources like VCRs, DVD players, and TVs.
Describes how to connect devices using SCART A/V connectors and adapters.
Provides crucial information regarding SCART-Cinch adapter cable usage.
Offers essential guidance on connecting S-Video devices correctly.
Explains how SCART-Cinch adapters affect TV input selection and signal handling.
Details limitations and requirements for RGB signal transmission via SCART.
Covers connecting system power, remote control extensions, and multiroom links.
Explains how to connect A-BUS modules for multiroom operation.
Details RS-232 port usage for remote control and software upgrades.
Describes the unit's accessory AC outlets and power cord connection.
Guides on choosing matching speakers for front channels for optimal soundstage.
Provides guidelines for optimal placement of center, front, and surround speakers.
Steps for powering up the AVR for the first time and initial checks.
Explains how to use the OSD system for easier adjustments and viewing status.
Details associating analog or digital inputs with specific input sources.
Allows configuration of tone controls and upsampling for audio settings.
Guides on selecting speaker sizes and configuring bass management for optimal sound.
Guides on selecting preferred surround modes for each input source.
Adjusts speaker timing for audio/video synchronization based on room acoustics.
Preserves dialogue intelligibility at low volumes for Dolby Digital sources.
Essential for proper surround sound balance and intensity across all speakers.
Automates speaker level calibration using the remote's microphone for optimal sound.
Allows manual fine-tuning of output levels using test tones or SPL meters.
Allows dimming or turning off front panel displays to reduce distraction.
Preserves settings during power interruptions or unplugging.
Lists various surround modes, their features, and delay time ranges.
Covers turning the AVR on/off and using the sleep timer for basic functionality.
Explains how to choose and switch between different audio/video input sources.
Details using direct inputs for multi-channel audio sources like DVD-Audio.
Explains how to use headphone jack, mute, tone controls, and Dolby Headphone modes.
Guides on selecting and using various surround sound modes for optimal listening.
Overview of digital audio benefits and connection methods for various formats.
Explains Dolby Digital audio format, its use with DVDs, LDs, and HDTVs.
Details the DTS digital audio system, its compatibility, and connection requirements.
Covers PCM audio playback from CDs, Laserdiscs, and DVDs, including connection.
Explains HDCD playback capabilities for enhanced audio fidelity and resolution.
Describes MP3 audio playback capabilities for computer audio files and portable devices.
Guides on connecting and selecting digital sources like DVD, HDTV, and CD players.
Explains the indicators showing received digital signal channels and interruptions.
Enables Dolby Digital playback with reduced peak levels for intelligibility at low volumes.
Details how to record audio/video sources using the AVR's output jacks.
Explains how to configure front panel digital and video jacks as inputs or outputs.
Fine-tunes speaker output levels using program material or test signals.
Allows assigning surround back channels for multiroom audio output.
Sets front panel displays to fade out after a period of inactivity.
Adjusts the brightness level of the front panel display.
Sets a default volume level for when the AVR is turned on.
Configures single-line messages on the display for feedback on control changes.
Adjusts the duration the full OSD menus remain visible on screen.
Details setting up and operating a multiroom audio system with the AVR.
Guides on configuring the AVR for multiroom audio and IR control.
Explains how to control multiroom sources and volume from remote locations.
Covers tuning AM/FM stations, station selection, and using the sleep timer.
Details methods for selecting stations, including manual tuning and presets.
Explains how to store and recall favorite radio stations using the memory presets.
Explains how to use the Radio Data System for FM station information.
Guides on tuning FM stations and automatically displaying RDS data.
Describes how to cycle through RDS data types like call sign, frequency, and text messages.
Allows searching for specific program types (PTY) on FM radio stations.
Provides an overview of remote programming capabilities for various devices.
Explains how to program the remote using its built-in library of device codes.
Details how to automatically search for and enter device codes into the remote.
Guides on teaching the remote new commands from an original device remote.
Allows assigning device codes to different buttons for custom remote control.
Explains how to record and recall sequences of commands with a single button press.
Explains how to record and recall sequences of commands with a single button press.
Allows linking remote control functions (like volume) to different devices.
Allows linking remote control functions (like volume) to different devices.
Guides on how to delete stored macro sequences from the remote.
Explains how to view stored macro command sequences.
Enables transport control buttons to operate a different device.
Resets volume punch-through settings to factory defaults.
Allows channel up/down buttons to control a different device.
Resets channel punch-through settings to factory defaults.
Enables transport control buttons to operate a different device.
Resets transport punch-through settings to factory defaults.
Allows disabling or enabling the EzSet SPL meter function on the remote.
Guides on renaming device names displayed on the remote's LCD screen.
Guides on renaming device names displayed on the remote's LCD screen.
Explains how to rename individual buttons on the remote for custom display.
Explains how to rename individual buttons on the remote for custom display.
Details how to reset the remote to its factory default settings, erasing all customizations.
Provides steps to reset the AVR's system memory to clear potential operational issues.
To Next Page
