Harman Kardon AVR137 - Disassembly Procedures (Part 3); Video PCB Removal; Input PCB Removal; Power Trans & Power PCB Removal

8. Disconnect connector (CN91-3P) on the Main PCB(38-1) from lead wire of the Power Trans(36)
9. Disconnect the lead wire(BN89-2P) on the Main PCB(38-1) from connector(CN89) on Regulator PCB(A)(40-2).
10. Disconnect the lead wire(BN19-3P,BN20-4P) on the Main PCB(38-1)
from connector(CN19-3P,CN20-4P) on TRANS PCB(40-4).
11. Remove 11screws(S13-1EA, S4-2EA, S6-2EA, S8-6EA) and then remove the Main PCB ASS’Y(38-1).
harman/kardon
AVR137/230 Service Manual
Page 10 of 87
All manuals and user guides at all-guides.com