Technical Specifications
17
ENGLISH
Signal Format
Sampling Frequency 44.1kHz
D/A Conversion RLS II w. Four 20 Bit Converters
Oversampling 8 times
Error Correction CIRC System
HDCD processor Pacific Microsonics PDM100
Analog Output Section
Frequency Response 8Hz to 20kHz ±0,5dB
Total Harmonic Distortion (THD) 0.002%
Dynamic Range 99dB
Signal-to-Noise Ratio 110dB
Channel Separation 100dB
Line Output Level 2.1V RMS
General
Power Requirement AC 220-240V/50Hz
Power Consumption 12 Watts
Dimensions
Width 440 mm
Height 110 mm
Depth 340 mm
Weight 6.1 kg
All features and specifications are subject to change without notice.
HDCD and High Definition Compatible Digital are registered trademarks of Pacific Microsonics, Inc.
To Next Page
Loading...
