Rear Panel Connections
6
ENGLISH
¡ Coaxial Digital Output: Connect
this jack to the coaxial digital input of
an external digital-to-analog converter
for direct access to the digital signals
of the HD760. DO NOT connect this
jack to the standard audio inputs of
any device.
™ Fixed Audio Outputs: Connect
these jacks to the CD audio inputs
of your receiver, surround processor
or preamplifier.
£ Optical Digital Output: Connect
this jack to the optical digital input of
an external digital-to-analog converter
for direct access to the digital signals
of the HD760.
¢ Autoplay Switch: When this
switch is in the “ON” position, the
HD760 will automatically go into the
Play mode whenever the power is
turned on and a disc is in the CD
drawer. To disable the Autoplay
function, put the switch in the OFF
position. (See page 14 for more
information.)
∞ Remote Control Input:
Connect the output of a remote
infrared sensor or the remote control
output of another compatible Harman
Kardon product. This will enable the
remote control system to operate
even when the front panel Remote
Sensor 3 is blocked. It will also
allow use of the HD760 with optional,
external control systems.
§ Remote Control Output:
Connect this jack to the input of
another compatible Harman Kardon
remote controlled device to have the
remote sensor on the HD760 provide
signals to other products.
¶ AC Power Cord: Connect this
plug to an AC outlet. If the outlet is
switch controlled, make certain that
the switch is in the ON position.
To Next Page
Loading...
