Harman Kardon OMNI BAR+ - Technical Specifications - Omni Bar

34
TECHNICAL SPECIFICATIONS
TECHNICAL
SPECIFICATIONS
Omni Soundbar+
• Frequencyresponse: 160Hz~20kHz(-6dB)
• Signal-to-noise ratio: >85dB
• Dimensions (W x D x H): W1150 x H103 x D53 mm
• NetWeight:OmniBar+:3.0kg
• Power supply: DC24V, 4A
• Bluetooth version: 4.1
• Bluetooth transmitter frequency range: 2402 – 2480MHz
• Bluetooth transmitter power: <4dBm
• Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• 2.4G Wi-Fi transmitter frequency range: 2412 – 2472MHz (2.4GHz ISM
Band, USA 11 Channels, Europe and others 13 Channels)
• 2.4G Wi-Fi transmitter power: <20dBm (EIRP)
• 2.4G Wi-Fi modulation: OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
• 2.4G Wi-Fi network compatibility: IEEE 802.11b/g/n
• 5G Wi-Fi transmitter power: <18.5dBm
• 5G Wi-Fi modulation: OFDM, DSSS, DBPSK, DQPSK, CCK,16QAM,
64QAM, 256QAM
• 5G Wi-Fi network compatibility: IEEE 802.11ac
• 5G Wi-Fi transmitter frequency range: 5.15 - 5.35GHz, 5.470 - 5.725GHz,
5.725 - 5.825GHz
• Power consumption in sleep mode: <3 Watts
• 2.4GHz wireless frequency range: 2402 – 2478MHz
• 2.4GHz wireless transmitter power: <20 dBm
• 2.4GHz wireless modulation: π/4 DQPSK
Note: The OMNI BAR+ is intended to be used for streaming music via Bluetooth and
Wi-Fi technology. This product is designed to be instantly on and ready to play music at
a moment’s notice, therefore, the Bluetooth and Wi-Fi must remain active at all times to
ensure proper operation.