Harman Kardon SB 16/230 - Soundbar Assembly and Disassembly; Soundbar Disassembly

Because the design itself, once disassembling the system, the top bottom trim panels snap points will break and new trim panel has to be replaced
1 Check the cabinet Check the baffle Attach protective film on the rear cabinet
2 Attach EVA foam gasket attach EVA foam gasket
3 load woofer ( screw PN 352-AM04008C1334-E X 16 pcs )
4 load tweeter add adhesives attach tweeter bar and screw down screw pn 352-AM03008C1086-E
5 left chan Xover (P/N 013-7600-05766-E) right chan xover (P/N 013-7600-05766-1E) Screw PN 352-AM03008C1086-E
harman/kardon
SB 16/230 Service Manual
Page 12 of 29
www.audiodna.sk
ASSEMBLY AND DISASSEMBLY, SB 16 SOUNDBAR.