Harman Kardon SB 230 - Specifications; SB 30 System, Soundbar, and Subwoofer Specifications

13
SB 30
ENGLISH
Specifications
Specifications
SB 30 System
Frequency response: 40Hz – 20kHz
SB 30 CNTR Soundbar
Low-frequency transducers: Six x 2" (51mm) cones
High-frequency transducers: Seven x 1" (25mm) domes
Amplifier power: 40 watts x 4; 10 watts x 7
Power requirement: 110V – 120V AC, 60Hz (USA);
220V – 240V AC, 50Hz (EU), selectable
Power consumption : <0.5W (standby); 230W (maximum)
Dimensions (H x W x D): 3-15/16" x 45-11/16" x 3-1/8"
(100mm x 1160mm x 80mm)
Weight: 8.4 lb (3.8kg)
SB 30 Subwoofer
Low-frequency transducer: 8" (200mm) down-firing cone
Amplifier power: 100 watts
Frequency response: 40Hz – 160Hz
Controls: Volume, phase
Enclosure type: Sealed
Power requirement: 120V, 60Hz (USA);
220V-240V, 50Hz/60Hz (EU)
Power consumption: <0.5W (standby); 100W (maximum)
Dimensions (H x W x D): 13-29/32" x 10-1/2" x 10-1/2";
(353mm x 267mm x 267mm)
Weight: 19.2 lb (8.7kg)
Harman Kardon
SB 30 / 230V Service Manual
Page 14 of 43
www.audiodna.sk