CHANNEL ONE CHANNEL TWO
EXPANDER / GATE LIMITERCOMPRESSOR
1066
Compressor/
Limiter/Gate
GAIN REDUCTION dB INPUT / OUTPUT LEVEL dBuTHRESHOLDTHRESHOLD THRESHOLD
THRESHOLD RATIO
4:1
:1
10:1
6:1
1:1
2:1
3:1
PeakStopPlusOUTPUT GAINTHRESHOLD
0
-20
-10
+10
+20
dB
SC Enable
SC Mon
OverEasy
Contour Auto I/O Meter Bypass
Stereo
Couple
EXPANDER / GATE LIMITERCOMPRESSOR
GAIN REDUCTION dB INPUT / OUTPUT LEVEL dBuTHRESHOLDTHRESHOLD THRESHOLD
SC Enable
SC Mon
OverEasy
Contour Auto I/O Meter Bypass
RATIO RELEASE
-24 -18 -12 -6 0 +6 +12 +18-24 -18 -12 -6 0 +6 +12 +18
-
+
-
+
+
24 212730 18 15 12 9 6 4 2 124 212730 18151296421
-
O +
-
O +
THRESHOLD RATIO OUTPUT GAINTHRESHOLD ATTACKRATIO RELEASE
+
-40
-20
+15
0
OFF
-60
dBu
2:1
4:1
3:1
1.2:1 8:1
1.4:1
1.6:1
PROFESSIONAL PRODUCTS
0
-20
-10
+10
+20
dB
.35
3
1
.15
.04
dB/mSec
4:1
:1
10:1
6:1
1:1
2:1
3:1
2:1
4:1
3:1
1.2:1 8:1
1.4:1
1.6:1
OFF
+16
+12
+4
+6
+8
dBu
OFF
+16
+12
+4
+6
+8
dBu
-40
-20
+15
0
OFF
-60
dBu
-10
0
+20
+10
-40
-30
-20
dBu
ATTACK
.35
3
1
.15
.04
dB/mSec
50
250
125
12.5
5
dB/Sec
50
250
125
12.5
5
dB/Sec
-10
0
+20
+10
-40
-30
-20
dBu
PeakStopPlus
®
• Selectable auto (classic dbx) or manual (variable
Attack and Release) compression
• Contour switch removes unwanted low frequency
information from detector circuit
• Selectable OverEasy® or Hard Knee compression
modes
• PeakStopPlus™ limiting for setting maximum allow-
able level with minimal distortion
• SC Ext and SC Mon for setting up and monitoring
external devices for gating function
• True differentially balanced gold-plated XLR and
1/4" inputs and outputs.
• True RMS level detection
• Precision metering of input level, output level, and
gain reduction
• True stereo or dual mono operation
• Switchable +4dBu or -10dBV operation per channel
• Proudly designed, manufactured and tested in the
USA
18-1690-C 01/99
The dbx 1066 is the Stereo Compressor/Limiter/Gate of the 90’s. After producing the world’s most renown series of compressors,
the task of producing a new compressor worthy of our reputation would be daunting for most engineers. Not for dbx. Our engi-
neers know audio like no one else in the world. Now the fruits of their talents are available to you in the form of the 1066 Stereo
Compressor/Limiter/Gate.
Want to instantly add that classic dbx response to your mix? It’s there at the touch of the “Auto” button. Or use the independent
Attack and Release controls to tailor the 1066 to your specific needs. Unwanted frequencies or mic bleed in the signal path?
Frequency dependent gain control is a snap to set up and execute with our Side Chain External button (SC Ext). Use the Side
Chain Monitor button (SC Mon) and your favorite EQ to dial in the specific frequencies you want to trigger the device. As has
become our standard, the contour switch allows entire mixes to be easily smoothed with soft compression while keeping low fre-
quencies from punching holes in the overall mix. Selectable input and output metering allow you to make sure that everything is
matched up level-wise, maximizing your signal-to-noise ratio.
For overall speaker protection, our new PeakStopPlus™ does all previous circuits one better. With a new design, the
PeakStopPlus™ represses those unwanted transients from blowing your drivers while minimizing the distortion common to many
other “hard” limiters. Selectable Hard-Knee or OverEasy® characteristics make the 1066 ideal for your gain control needs,
whether you’re looking for “heavy” almost-special-effects compression or soft, smooth gain leveling. New lightpipe technology
replaces standard LED’s found on most other units, making the 1066 both very easy to read and much easier to operate.
In the studio, broadcast facility or on the road with a P.A. system, the 1066 is designed for perfectly simple operation. The 1066
allows you to eliminate unwanted signals, flexibly control overall signal gain and guard your overall mix in dual mono or stereo
operation.
At the heart of the 1066 is our new dbx V2™ VCA. Developed especially for the 1066, 1046 and other 10 series products to come,
this revolutionary VCA boasts superb dynamic range characteristics while maintaining very low distortion and almost immeasur-
able noise characteristics. The bottom line is this: a new VCA working in conjunction with world class design makes the dbx 1066
perform better than compressors selling for hundreds more.
State-of-the-technology VCA’s, meticulous component selection, and scrupulous testing procedures are just a few more reasons
that the new dbx 1066 is the latest in a long line of pedigreed dbx signal processors.
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
Int’l Fax (801) 568-7583
customer@dbxpro.com
http://www.dbxpro.com
A Harman International Company
To Next Page
Loading...
