www.jbl.com
English
1313
7.3 Control music playback
You can control music playback while streaming music from the
JBL One app, Chromecast built-in, Alexa Multi-Room Music,
Alexa Cast, AirPlay, or Bluetooth.
×1
×2
×3
• Press once to play or pause playback.
• Press twice to skip to the next track.
• Press three times to skip to the previous track.
• Rotate the volume knob clockwise or counterclockwise to
increase or decrease the volume.
NOTE:
– Music control is unavailable in AUX mode.
7.4 Play from the AUX source
With a 3.5 mm audio cable, listen to music playback on an
external audio device through the speaker.
21
1. Check that the speaker has been properly connected to the
external audio device (See “5.3 Connect to an external audio
device”).
2. Check that you have paused music streaming over Bluetooth
and your home network on the speaker.
3. Start audio play on the external audio device.
4. Adjust the volume on the external audio device or the speaker.
NOTE:
– If there is no audio output from the external audio device connected
with an audio cable, disconnect and reconnect the cable, and try
again.
8. SPEAKER GROUPING
Through the JBL One app, you can create a stereo pair by
connecting the speaker with another speaker of the same
model (sold separately).
To create a stereo pair through the JBL One app:
• When two Authentics speakers of the same model are
connected to the same network, follow the app instructions
to group two speakers as a stereo pair.
→ When the stereo group is created successfully, you can
control playback on the stereo group.
NOTES:
– If only one of the speakers is switched on after grouping, you can still
enjoy music on the single speaker.
– In the JBL One app, you can rename the stereo group or unpair the
two speakers.
To Next Page
Loading...
