Harman JBL AUTHENTICS 300 - POWER ON; OFF; AC-powered mode; Battery mode

www.jbl.com
English
77
4. POWER ON / OFF
4.1 AC-powered mode
4.1.1 Connect power
• Connect the speaker to power by using the supplied power
cord.
4.1.2 Switch on
• To switch on, press .
4.1.3 Auto standby
If the speaker is inactive for more than 10 minutes, it will switch
to standby mode automatically.
4.1.4 Auto wakeup
In standby mode, the speaker will wake up automatically when
• you press any button on the speaker;
• the speaker is connected to your home network and you
control the setup and playback on the speaker through the
JBL One app;
• the speaker is connected to your home network and you
wake up the speaker through an enabled voice assistant;
• the speaker is connected to your home network and audio
is streamed to the speaker through the supported streaming
services that you have enabled in the JBL One app;
• an audio cable has been inserted into the speaker and music
playback has started from the external device connected
through the audio cable.
4.2 Battery mode
4.2.1 Charge the battery
100 %
50 % 20 %
• Connect the speaker to power by using the supplied power
cord.
→ Battery charging starts automatically.
4.2.2 Power-saving mode
In the battery mode, the speaker automatically powers off after
1 hour of inactivity to save power. Press to switch on.
NOTE:
– To avoid draining the battery, switch off the speaker if it is not going
to be used for a long time.