12
CPi2000 Cinema Processor
User Guide
controls, set the global output volume, and navigate through menu screens or edit parameters.
•
To unlock front panel controls (only operatable when the CPi2000 is controlled through front panel controls
other than its GUI software)
1) Long press the Encoder for 2 seconds.
Long press 2 seconds to unlock.
•
To set the global output volume:
1) Ensure the LCD display is showing the home screen.
2) Rotate the Encoder clockwise to increase the volume or counter-clockwise to decrease the volume.
Rotate clockwise to increase the volume.
•
To navigate through menus or parameters under the Menu button (2 @ front panel):
1) Press the Menu button (2 @ front panel) to navigate the LCD screen to the Menu section.
2) Rotate the Encoder to select the sub-menu which is going to be checked or edited.
3) Short press the Encoder to navigate to next level menues. Or short press to confirm the any parameter
editing.
Rotate to navigate among
menus or parameters.
Short press to confirm or navi-
gate to next level menues.
To Next Page
Loading...
