16
CPi2000 Cinema Processor
User Guide
QUICK CONNECTION
NOTE: Ensure all the devices are powered off before connection.
NOTE: Turn all the volume controllers of each device to the lowest before connection.
NOTE: Always power on the amplifiers last and power off the amplifiers first.
To start a quick connection of your theatre audio system, please refer to Figure "Quick Connection Guide".
1. Connect input devices, e.g. microphone, CD/DVD player, cinema server, control PC, etc.
2. Connect output devices, e.g. power amplifiers and speakers, etc.
3. Connect the unit to power supply.
4. Power on all the devices.
Now you can configure the entire system through the tailor-designed GUI software and monitor the system status via
its front panel controls and LCD display.
To Next Page
Loading...
