Harman JBL CPi2000 - Panel Overview; Front Panel

8
CPi2000 Cinema Processor
User Guide
PANEL OVERVIEW
FRONT PANEL
1 2
3
4
5
6
7
8 9
1. LCD Display
The LCD display is 320x160 pixels. When the unit is powered on, the home screen is displayed, where the hall name,
IP address and the global output volume are shown.
Home Screen
The following icons may appear on the display:
• indicates the CPi2000's AC Power Input (1 @ rear panel) is properly connected.
• indicates the CPi2000's Backup DC Power Input (10 @ rear panel) is properly connected.
• indicates the CPi2000's USB Connector (6 @ rear panel) is short-circuited.
• appears if one of the following scenario occurs:
•
The CPi2000 is controlled through the front panel controls, which are left idle for 2 minutes. To unlock the
front panel controls, long press the Volume/Edit Encoder (9 @ front panel) for 2 seconds.
•
The CPi2000 is controlled through its GUI software. In this situation, the front panel controls can not be
unlocked.
2. Menu Button
By pressing the Menu button, the LCD display (1 @ front panel) will navigate to the menu section. Using the
Volume/Edit Encoder (9 @ front panel), the following parameters can be monitored or edited. Please refer to "MENU
STRUCTURE" for more informaiton.