9
CPi2000 Cinema Processor
User Guide
•
INPUT LEVEL
The INPUT LEVEL screen is used to monitor and select an input source. To select one of the following input
sources:
•
Analog Input (5 @ rear panel) - Press the Analog Input button (3 @ front panel).
•
Digital Input (4 @ rear panel) - Press the Digital Input button (5 @ front panel).
•
Mic Input (2 @ rear panel) - Press the Mic Input button (4 @ front panel).
•
Music (Non-Sync) Input (3 @ rear panel) - Press the Music (Non-Sync) Input button (6 @ front panel).
The selected input source on the INPUT LEVEL screen will be backed in white. For instance, will turn to
when Mic Input is selected using the Mic Input button.
INPUT LEVEL Screen
•
OUTPUT LEVEL
The OUTPUT LEVEL screen is used to monitor the global output volume of the unit as well as the output volume
of each channel. To edit output volume of each channel, please use the GUI software specifically designed for
CPi2000.
OUTPUT LEVEL Screen
•
IP ADDRESS
The IP ADDRESS screen is used to monitor or edit network settings of the unit, which include IP
address, Subnet mask, Gateway, etc. The default IP address of CPi2000 is "192.168.1.102", Subnet mask
"255.255.255.0", Gateway "192.168.1.101". (NOTE: for MAC address, please refer to the label on the rear
panel.)
IP ADDRESS Screen
To Next Page
Loading...
