15
CPi2000 Cinema Processor
User Guide
INSTALLATION
MOUNTING
NOTE: Ensure the power cable is disconnected from the power supply before installing the unit.
NOTE: Please ensure all the rack-mounted devices are properly grounded (earthed).
CPi2000 occupies 2U space and can be placed on a solid and stable surface or mounted on a standard equipment
rack. Before mounting or installing the unit, please disconnect its power cable from power supply completely.
To rack-mount the unit, fix its front panel to the rack using the screws provided. See Figure "Rack Mouting".
To avoid hum pickup problems, please locate the unit away from any power amplifiers. For ventilation purpose,
always leave 1U space above and below the unit and do not block any ventilation openings.
482
Measured in mm
Dimensions
Equipment Rack
Screw fix the front panel
of CPi2000 to the rack
1U space
1U space
Rack Mounting
To Next Page
Loading...
