18
CPi2000 Cinema Processor
User Guide
RESETTING
CPi2000 can be reset using the front panel controls. Such resetting will erase all user data and restore the firmware to
factory default. Hence, please save all the device files properly before resetting.
To restore your CPi2000 to factory settings:
1. Press down both the Mic Input button (4 @ front panel) and the Mute button (8 @ front panel).
2. Switch on the Power button (7 @ front panel).
3. Continue to hold the Mic Input button and the Mute button for about 10 seconds till the LCD shows "RESTORING
FACTORY RESETTINGS NOW".
RESTORING FACTORY RESETTINGS NOW
4. Release the two buttons and await about 20 seconds for the CPi2000 to reset and reboot.
5. When the LCD shows the Home Screen, the device is ready for operation.
Home Screen
To Next Page
Loading...
